Retort to the Ammonia cracking Furnace is superior grade HU alloy and non-Inconel alloy. It shall be single piece centrifugal casted retort with no longitudinal welding joint. It is 100% X-Rayed and Ammonia cracking catalyst used is high Nickel content catalyst to give complete Ammonia cracking. These features make our ammonia cracker more efficient, Low power consumption and Operation friendly.
Major applications of Ammonia Cracker Unit
- On site Generation of cracked gas Ammonia
- For Nitrogen Generation Plants
- Pipe Manufacturing Industry
- Sintered Brazing Industry
- Galvanizing Plants
- Automobile Industry
- Heat Treatments
Technical Specification of Ammonia Cracker Unit
- Flow ranges from 2 Nm3/hr to 20 Nm3/hr.
- Cracked Ammonia gas Having 75% Hydrogen and 25% Nitrogen
- The dew point Achieved up to -80 Deg Cent.
- Cracked ammonia gas pressure ranges from 1 kg/cm2 to 5 kg/cm2
Models and available of Ammonia Cracker Unit
|
MODEL
|
CAPACITY NM3/HR
|
|
GAZ-NH3-05
|
0 TO 5 NM3/HR
|
|
GAZ- NH3 -10
|
6 TO 10 NM3/HR
|
|
GAZ- NH3-20
|
11 TO 20 NM3/HR
|
|
GAZ- NH3 -30
|
21 TO 30 NM3/HR
|
|
GAZ- NH3 -50
|
31 TO 50 NM3/HR
|
Major Equipments of Ammonia Cracker Unit
- Ammonia manifold complete with isolation valves
- Ammonia Regulator Ammonia Pressure regulator to reduce pressure valve
- standby Regulator
- Finned cooler complete with moisture separator.
- Cracked Gas Flow Meter
- Heat Exchanger
- Ceramic fiber lined electrically heated furnace
- Retort filled with Nickel catalyst
- Cracked Gas Purifier with Desiccant
- Electrical control panel fully wired with required indicator
- Instrumentation like low & high pressure switches,
- Safety, valves, flow switches, temp. Controllers etc.
- All inter connected piping within battery limit
- Cracked Gas Purifier with Desiccant
Advantages of Ammonia Cracker Unit
- On-site Ammonia cracking Unit to get Cracked Ammonia
- It is economical Process to get Cracked Ammonia
- It is easy to operate and less maintenance
- Less space required
